Cisp Enable - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

cisp enable

Use the cisp enable global configuration command to enable Client Information Signalling Protocol
(CISP) on a switch.
Syntax Description
cisp enable
Defaults None
Command Modes Global configuration
Command History Release
12.2(54)SG
Usage Guidelines You must enable the CISP protocol (with the global cisp enable command) on both the authenticator and
supplicant switch. The CISP protocol is crucial because it conveys the client information from the
supplicant switch to the authenticator switch thereby providing access for the clients of the supplicant
switch through the authenticator switch.
Examples
This example shows how to enable CISP:
switch(config)# cisp enable
Related Commands Command
dot1x credentials (global
configuration)
show cisp
OL-27596 -01
cisp enable
no cisp enable
Enable CISP.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Configures a profile on a supplicant switch.
Displays CISP information for a specified interface.
cisp enable
2-91