Debug Backup - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug backup

To debug the backup events, use the debug backup command. To disable the debugging output, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to debug the backup events:
Switch# debug backup
Backup events debugging is on
Switch#
Related Commands Command
undebug backup (same as no
debug backup)
OL-27596 -01
debug backup
no debug backup
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Disables debugging output.
debug backup
2-141