Cisco Catalyst 4500 Series Command Reference Manual page 111

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
class-map match-all AutoQos-4.0-Broadcast-Vid
class-map match-all AutoQos-4.0-Realtime-Interact
class-map match-all AutoQos-4.0-Network-Ctrl
class-map match-all AutoQos-4.0-Internetwork-Ctrl
class-map match-any AutoQos-4.0-Signaling
class-map match-all AutoQos-4.0-Network-Mgmt
class-map match-any AutoQos-4.0-Multimedia-Conf
class-map match-any AutoQos-4.0-Multimedia-Stream
class-map match-any AutoQos-4.0-Transaction-Data
class-map match-any AutoQos-4.0-Bulk-Data
class-map match-all AutoQos-4.0-Scavenger
The AutoQos-4.0-Signaling and AutoQos-4.0-VoIP classes must match on CoS to handle the situation
when an IP phone is connected to an interface. (Cisco IP phones are only capable of re-marking CoS
bits, not DSCP.)
policy-map AutoQos-4.0-Input-Policy
OL-27596 -01
match cos 5
match dscp cs5
match dscp cs4
match dscp cs7
match dscp cs6
match dscp cs3
match cos 3
match dscp cs2
match dscp af41
match dscp af42
match dscp af43
match dscp af31
match dscp af32
match dscp af33
match dscp af21
match dscp af22
match dscp af23
match dscp af11
match dscp af12
match dscp af13
match dscp cs1
class AutoQos-4.0-VoIP
set qos-group 32
class AutoQos-4.0-Broadcast-Vid
set qos-group 32
class AutoQos-4.0-Realtime-Interact
set qos-group 32
class AutoQos-4.0-Network-Ctrl
set qos-group 16
class AutoQos-4.0-Internetwork-Ctrl
set qos-group 16
class AutoQos-4.0-Signaling
set qos-group 16
class AutoQos-4.0-Network-Mgmt
set qos-group 16
class AutoQos-4.0-Multimedia-Conf
set qos-group 34
class AutoQos-4.0-Multimedia-Stream
set qos-group 26
class AutoQos-4.0-Transaction-Data
set qos-group 18
class AutoQos-4.0-Bulk-Data
set qos-group 10
class AutoQos-4.0-Scavenger
set qos-group 8
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
auto qos srnd4
2-53