Clear Ip Wccp - Cisco Catalyst 4500 Series Command Reference Manual

clear ip wccp

clear ip wccp
To remove Web Cache Communication Protocol (WCCP) statistics (counts) maintained on the switch
for a particular service, use the clear ip wccp command in privileged EXEC mode.
Syntax Description web-cache
service-number
Defaults
No default behavior or values.
Command Modes
Privileged EXEC (#)
Command History Release
15.0(2)SG
Usage Guidelines Use the show ip wccp and show ip wccp detail commands to display WCCP statistics.
Use the clear ip wccp command to clear the WCCP counters for all WCCP services in all VRFs.
Examples
The following example shows how to clear all statistics associated with the web cache service:
Switch# clear ip wccp web-cache
Related Commands Command
ip wccp
show ip wccp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-116
clear ip wccp [vrf vrf-name {web-cache | service-number}] [web-cache | service-number]
Description
Enables support of the specified WCCP service for participation in a service
group.
Displays global statistics related to the WCCP.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
(Optional) Directs the router to remove statistics for the web cache
service.
(Optional) Number of the cache service to be removed. The number
can be from 0 to 99.
Modification
This command was introduced on Supervisor Engine 6-E, Supervisor
Engine 6L-E, Catalyst 4900M, and Catalyst 4948E.
OL-27596 -01