Reject A Call; To Place A Call; Automatic External Line Access; Dialling - TIPTEL 83 VoIP User Manual

Reject a call

In case you wish to reject a call please press the

To place a call

With outgoing calls always the first SIP account that was set up will be pre-selected.
In case you set up more than one SIP account and you programmed the function
keys as account selection keys you can select another account. In case you acti-
vated "Automatic Server Detection" and that account is currently not active then the
next account will be used.

Automatic external line access

In case your tiptel.com telephone system was programmed to provide automatic
external line access to that provider, in order to be able to place an internal call you
will have to dial the code number as a prefix and then dial the internal number be-
fore you pick up the handset or press the

Dialling

Pick up handset and wait for dial
tone.
Enter the telephone number.
To re-dial the last number dialled
press Re-Dial .
In case you set up more than one SIP account and you programmed the function
Configuration
      
  
    
key, "Reject".
key.
The digits entered will be displayed and
be dialled according to Digital Map and
Rules (e.g. after concluding the entry by
.
The last number dialled will be dialled
again.
    
65