Safety Notes - TIPTEL 83 VoIP User Manual

Safety notes

Please make sure to observe the following when installing , and operating tiptel 83
VoIP:
•
This telephone was designed to be operated in an Ethernet network complying
with the Standard IEEE-Norm 802.3 which is in accordance with the Standards
for SELV circuits.
• This device is an IP telephone. Do not try to connect it to a conventional ISDN or
analogue telephone access.
•
Connect the connection cable only to outlets designed for this type of connec-
tion.
•
Install all cables accident proof. Connected cables may not be stressed me-
chanically.
•
Position the telephone away from any electrical sources of interference.
•
Use only accessories that are approved for this telephone.
•
Never try to open the telephone. Do not touch the connectors with sharp or me-
tallic devices.
•
The battery cover at the bottom of the telephone has no function and so has
been locked with a screw. It must not be opened.
•
Clean the telephone only with a soft damp cloth. Do not use any chemicals or
abrasive detergents.
•
Protect the telephone from humidity, dust, water, and vapours.
•
Do not use the telephone at locations with direct sunlight.
•
Do not use the telephone in explosive areas.
•
Only use the original AC adapter (part-no. 4569175) that came along with your
telephone.
Safety Notes
4