Rules - TIPTEL 83 VoIP User Manual

Generally a telephone number or a target address must be sent as on e single
string. So tiptel 83 VoIP first saves all entered digits and then sends them as a sin-
gle string to the SIP proxy. In order to enable tiptel 83 VoIP to detect when a num-
ber has been dialled completely there are different procedures available:
End with # ................... Activate this option in case you wish to conclude
Fixed length ................. The number will be dialled once the number of dig-
Time out ....................... The number will be dialled when there has been no

Rules

WEB → VoIP Phone Menu → Advanced Setting → Digital Map → Rules
by defining rules you can generate the dialling conclusion automatically. This
means if a number matches a rule it will be automatically dialled immediately or - if
a delay time was programmed - after the time out. Rules may also be combined
with "Dial Peer". Here. first the rule the rule detects the end of the telephone number
while "Dial Peer" then converts the telephone number.
Rules can be only one single telephone number or they can comprise wildcards or
control sequences. Following settings are available:
1234567890 ................ Once a telephone number matches the pro-
[1,2,3] or [123] ............ Digits can (as part of a telephone number) comprise
[1-3] ............................ Digits can (as part of a telephone number) comprise
x .................................. Any digit
Configuration
the telephone number to be dialled with the
Note: Many programming and system functions of
your tiptel.com telephone system can then only be
programmed by sending the sequence as a single
string.
its reaches or matches the number of digits pro-
grammed here.
further input for the number of seconds pro-
grammed here.
grammed sequence of digits (in this case
"1234567890") this number will be dialled.
those digits shown in parenthesis.
the range of digits shown in parenthesis.
40
key.