Port Configuration; Special Settings When Operating As Gateway; Nat - Network Address Translation - TIPTEL 83 VoIP User Manual

Port configuration

WEB → VoIP Phone Menu → Network Setting → Net Service
Set those ports under which the individual service can be accessed.
HTTP Port .................... Via this port the web configuration of your tiptel 83
Telnet Port.................... Via this port the telnet service of your tiptel 83 VoIP

Special settings when operating as gateway

If you do not operate the LAN port in bridge mode there are some more settings
options.
NAT – Network address translation
WEB → VoIP Phone Menu → Network Setting → NAT
When you operate your tiptel 83 VoIP as gateway then you can use the NAT set-
tings to optimize the functions of your network.
WEB → VoIP Phone Menu → Network Setting → NAT Setting→ Protocol Set
IPSec ALG.................... NAT also applies to IPSec protocol
FTP ALG....................... NAT also applies to FTP protocol
PPTP ALG .................... NAT also applies to PPTP protocol
Port forwarding always applies to a protocol.
Configuration
VoIP can be accessed. If you enter another port you
will have to type this in the address bar of your
browser - with e.g. port 100 this would look like
192.168.10.1 : 100.
Note: These changes will only be applied after a re-
start of your tiptel 83 VoIP.
If you enter "0" your tiptel 83 VoIP cannot be config-
ured by using a web browser.
can be accessed.
51