Dhcp Settings - TIPTEL 83 VoIP User Manual

DHCP settings

WEB → VoIP Phone Menu → Network Setting → DHCP
In case you wish your tiptel 83 VoIP to represent a DHSP server at its LAN port then
you will have to enter the necessary data here. You can enter more than just one
table. When the DHCP server of your telephone has been activated network devices
(DHSP clients) will automatically be assigned with a dynamic IP address unless
they have not been set to a static IP address. In the dynamic IP address range there
may be no static IP address of a network device.
Lease table name ........ Name of the data set
Start IP ......................... First dynamic IP address that can be assigned by
End IP .......................... Last dynamic IP address that can be assigned by
Lease Time .................. Lease time in minutes. The lease time defines how
Netmask....................... The subnet mask must match the IP address range
Gateway ....................... IP address of the gateway which shall be trans-
DNS.............................. IP address of the DNS server which shall be trans-
DNS-Relay ................... With activated DNS relay your tiptel 83 VoIP serves
Configuration
the DHCP server
the DHCP server
You should usually select a dynamic IP address
range in that network in which the LAN port of your
tiptel 83 VoIP is located.
long an IP address assigned by a DHSP server is
valid.
set and will be transmitted to the client during a
DHSP request.
You should usually select a the subnet mask which
you set under LAN settings.
ferred to the DHCP client.
This is usually the LAN IP address of your tiptel 83
VoIP.
ferred to the DHCP client.
to the WAN side as DNS client and to the LAN side
as DNS server. This means DNS queries from the
LAN side will be transferred to the DNS server in the
WAN.
50