TIPTEL 83 VoIP User Manual page 54

SIP{1..5} Account ........
Account name
SIP{1..5} Password......
Password
SIP{1..5} Registration ..
Account active
Following settings are only needed in special:
Display Name
Proxy Server Address
Proxy Server Port
Proxy Username
Proxy Password
Domain Realm
When operating the telephone as a system telephone at a tiptel.com tele-
phone system following settings will have to be carried out:
Configuration
here you should enter the account name assigned
to you by your SIP provider (when using as a sys-
tem telephone: The name of the subscriber that
has been set up in the Tiptel telephone system).
In case you encounter any problems when regis-
tering please use the same entry for telephone
number and account.
here you should enter the assigned to you by your
SIP provider (when using as a system telephone:
The password of the subscriber that has been set
up in the Tiptel telephone system).
here you can programme whether or not the SIP
account shall be used.
Enter a name that shall be transferred to the called
party with outgoing calls (CNIP)
In case your SIP provider operates separate serv-
ers for registration and SIP proxy the you will have
to enter here the IP address or the domain name of
the proxy server.
Here you should enter the port via which the SIP
server can be accessed.
Here you should enter the account name assigned
to you by your SIP provider.
Here you should enter the password assigned to
you by your SIP provider.
Here you should enter the SIP Domain name. In
case you do not enter any realm either the server
addresses from registrar or from proxy will be
used. In most cases you do not need to perform
any entry here.
54