TIPTEL 83 VoIP User Manual page 31

Advanced → Network → Static →Netmask
Subnet mask of your network
Advanced → Network → Static →Gateway
Gateway of your network
Advanced → Network → Static →DNS
IP address of your DNS server
3. Programming SIP user agent
To male sure that tiptel 83 VoIP will be detected as system telephone by the
telephone system you need to carry out the following setting:
WEB → VoIP Phone Menu → SIP Setting→ Advanced Setting → SIP-Advanced
Setting → SIP-User Agent
Here you should enter "tiptel 83VoIP".
4. Programming function keys
WEB → VoIP Phone Menu → Function Key Setting → Function Key Type:
Command Button
The setting "Command Button" applies to all function keys. In this setting the
function keys will be programmed by the telephone system.
5. Programme DTMF dialling
WEB → VoIP Phone Menu → SIP Setting→ Advanced Set → DTMF Mode
Here you should programme "DTMF_RELAY" in order to be able to remotely
query e.g. your voice box.
When operating tiptel 83 VoIP as a system telephone nearly all function known from
an ISDN telephone are at your disposal. Operation, however, is different in some
points.
Your system telephone does not support any acoustic acknowledge signals. After
keypad programming (e.g. deflection with #21#) you will hear a busy signal. Ac-
knowledgement is being given by a call back.
First Steps
31