Installation; Safety Information; Connection - TIPTEL Profi Clip Operating Instructions Manual

Installation

Safety information

· Read carefully these operating instructions and keep them for future reference. In case of
questions, please contact qualified personnel. Any work of service and maintenance shall be
carried out exclusively by a correspondingly qualified person. Never open the telephone housing
on your own.
· Do not touch plug contacts with sharp, metallic or moist objects.
· Use a non-slip pad under the device as it might be possible that some types of furniture lacquers or
plastics may attack the rubber feet of your device and thus cause patches on the surface of the
furniture. The manufacturer cannot accept liability for any damage of that kind.
· Do not expose the device permanently to direct sun or other sources of heat.
· Protect the device against dampness, dust, aggressive liquids, steam or smoke.
· Do not expose the device to strong electromagnetic fields (electric engines, television, video
recorder, hifi sets, household appliances). This might have a negative impact on the voice quality.
· Plug the connecting cables of the device only in the corresponding sockets. Do not exchange the
plugs of the connecting cable.
· Do not hold and carry the device at the connecting cables.
· Clean the housing surface with a soft slightly moist or antistatic cloth. Please do not use abrasive
liquids or chemicals to clean the device.

Connection

The receptacles for the telephone connecting cable can be found on the rear side of the device and the
receptacle for the connection of the handset is located on the left side of the housing.
· Connect the curled handset cord with the handset and the relevant receptacle TEL (3) in the
device.
· At the bottom cabinet of the device, open the battery compartment and connect the contacts to the
corresponding battery contacts of the 9 V alkaline block battery. Then, insert the battery and close
the battery compartment. The symbol indicating a necessary battery exchange disappears. The
battery guarantees the maintenance of the telephone functions and features and the retention of
data in case of power failure and does not come with the delivery.
Please note: Discharged batteries have to be exchanged very quickly (< 60 seconds). Otherwise,
all saved data will be lost.
· Plug the delivered connecting cable in the LINE (2) jack and plug the connecting plug (TST) in the
telephone connecting receptacle (TDO). Handset symbol
Page 6