Removal.and.replacement; Diverter.valve; Waterfall Control Optional - Hydropool Hot Tub Owner's Manual

JET INSERT REMOvAL & REPLACEMENT
bLASTER, PULSATOR, MASSAGE, POWER MASSAGE/
SPINNER, MEDIUM & MEDIUM PULSATOR JET
TO REMOvE:
• Turn the jet conter-clockwise to unclip & pull out of socket.
TO RE-INSTALL:
• Push the jet into the socket until it snaps into place, ensuring the
square pin on the back of the jet lines-up with the groove in the
socket flange.
DIvERTER vALvE
When your HYDROPOOL hot tub is equipped with a diverter valve,
it allows you to direct the flow of the water so that it increases the
power of the jets on the CAPTAINS CHAIR or on the LOUNGER, or a
combination of the two. Simply turn the valve left or right.
Always: return the valve handle to the middle position before
exiting the hot tub to ensure that there is air and water flow
to the ozone jet and ice bucket/filter niche drains for proper
performance.

WATERFALL CONTROL OPTIONAL

If your hot tub was ordered with the optional waterfall feature, then you will have a waterfall flow control valve. The
waterfall feature was designed to provide a gentle cascade of water over the neck and shoulder area. Simply turn the top
of the control clockwise for more water flow, and counterclockwise for less water flow.
H y d r O p O O l I n d u s t r I e s
39