Basic Settings - WMF 1000 S User Manual

Operation

3.6.4 Basic settings

Following settings can be adjusted:
Language*
Switch off time*
Switch-on time
Eco-Modes (energy saving mode)*
Brewing temperature
Illumination
Offi ce functions
Warm up rinsing
The basic settings marked with a * have already been set during the commissioning. However, you can subsequently change these values too.
The description for this can be found under the chapter "2.9 Initial setting" on page
In order to adjust the basic settings, proceed as follows:
>
Select the basic
settings
45
Press P button.
select program
browse: +
Basic settings
Time*
Date*
Display of time/date
Water hardness*
Water fi lter*
Special information tone
Contrast display
Factory settings
14.f.
>
+
Browse with for basic settings.