WMF 1000 S User Manual page 49

Operation
grinding grade OK
test: P end: C
grinding too coarse
test: P end: C
If the grinding grade is set correctly, the brewing pressure
is in the optimum range.
The message "Grinding grade OK" appears.
>
Then confi rm the grinding grade setting with off/c.
If necessary, the grinding grade can be adapted to suit.
If the grinding grade is too coarse, the coffee will run out
quickly, the cream is light in colour and small in volume
and the aroma is fl at.
The message "Grinding grade too coarse" appears.
>
Adapt the grinding grade using the Multitool (see "Set
the grinding degree" on page 44).
>
Place a drinking vessel under the All-in-One spout.
>
To test the new setting, push
Two new brewing tests start one after the other. The
brewing pressure is shown as a bar diagram during the
second brewing test.
The result of the grinding grade check is shown in the
display after a few seconds.
>
If the grinding grade setting is ok, confi rm with off/c.
If necessary, the grinding grade can be adapted (see "Set
the grinding degree" on page 44).
P .
42