WMF 1000 S User Manual page 50

Operation
If you change the type of beans, the result of the brewing test can be different. For this reason, we
would advise you to re-set the grinding grade when you change the type of beans.
43
grinding too fine
test: P end: C
If the grinding grade is too fi ne the delivery stream is
irregular, fl ow problems can arise and the ground coffee
blocks the sieve or brewing unit.
The message "Grinding grade too fi ne" appears.
>
Adapt the grinding grade using the Multitool (see "Set
the grinding degree" on page 44).
>
Place a drinking vessel under the All-in-One spout.
>
To test the new setting, push
Two new brewing tests start one after the other. The
brewing pressure is shown as a bar diagram during the
second brewing test.
The result of the grinding grade check is shown in the
display after a few seconds.
>
If the grinding grade setting is ok, confi rm with off/c.
If necessary, the grinding grade can be adapted (see "Set
the grinding degree" on page 44).
P
.