WMF 1000 S User Manual page 79

Care
Using milk system
>
Fill the dispensing chamber (a) of the WMF milk system cleaner, by holding the closed bottle upright
cleaner
and pressing it. The bottle must be defi nitely held closed.
Hazard!
a
Hazard of eye injury!
In case of eye contract, the WMF milk system cleaner can lead to serious eye injuries.
> Ensure that the WMF Milk system cleaner never comes in contact with the eyes of humans or animals.
>
Open the lid of WMF Milk system cleaner.
>
Mix one measuring cap of WMF milk system cleaner and 200 ml water in a container.
>
Place all parts of the milk system in the cleaning solution for minimum 5 hours or overnight.
>
Finally, rinse all the parts thoroughly under running water.
>
Clean the beverage spouts with the brushes provided (b).
b
>
Dry the parts with a cloth and allow it to dry completely before the assembly.
>
Assemble the milk foamer (connect the upper and lower part together, attach the milk hose).
Reassembling the
parts
> Screw the air inlet tube (10c) onto the milk foamer and screw the black cap
(10d) onto the air inlet tube.
>
Insert the milk foamer into the All-In-One spout from below.
>
Push the All-In-One spout downwards.
>
Lay the milk hose in the guide and place the milk nozzle and, if necessary, also the milk lance back on
the hose (see chapter "2.6 Installing milk hose" on page 11).
>
Insert the water tank.
72