Start-Up Program; Basic Settings - WMF 1000 PRO User Manual

Start-up program

>
Press the Off/C button
The start-up program begins.
>
Press the button to set the desired language.
+
>
Confirm with the P button.
The machine is switched on, the start-up program leads you through the basic settings.

Basic settings

>
Press the - and + buttons to set the desired values
>
Press the P button to confirm the values and inputs
After confirmation, the program jumps to the next point of the settings.
When exiting the program, the new values are saved.
Time
>
Set the current time here.
hh= hour (two places)
mm= minutes (two places)
ss= seconds (two places)
Date
>
Set the current date here.
dd= day (two places)
mm= month (two places)
yyyy= year (four places)
language: english
OK: P change: -/+
initial setup
of your WMF 1000
time hh:mm:ss
OK: P change: -/+
date dd:mm:yyyy
OK: P change: -/+
Start‑up program
The set values can be changed in
the "Basic Settings" program after
start-up.
See
"Settings" chapter
Cup preheating
P
Select/confirm
Care button
Page backwards
–
Reduce value
Page forwards
+
Increase value
The new values are saved when you exit
the program.
11