Basic Settings; Time; Date; Water Hardness - WMF 1000 User Manual

Commissioning
initial setting up initial setting up
of your WMF 1000 of your WMF 1000
The machine is switched on, the commissioning program
leads you through the basic settings.

Basic Settings

set the desired values with the
Use the P button to confirm the values and inputs. After

confirmation, the program jumps to the next point of the
settings.
When exiting the program, the new values are saved.

Time

time: hh:mm:ss time: hh:mm:ss
OK: P change: -/+ OK: P change: -/+
set the current time here.
Format: hh=hour (two digits), mm= minute (two digits),
ss= seconds (two digits).

Date

date dd:mm:yyyy date dd:mm:yyyy
OK: P change: -/+ OK: P change: -/+
set the current date here.
dd= day two-digit,
mm= month two-digit
yyyy = year four-digit.

Water hardness

water hardn.: 13-16 water hardn.: 13-16
OK: P change: -/+ OK: P change: -/+
set the result of the carbonate hardness test here.
14
and buttons.
- +
The display goes out after 5
seconds.
The set values can be changed
in the "Settings" program after
commissioning.
See
Chapter 4 Settings
Select
P
Confirm

Care button
Browse backwards
–
Reduce value
Browse forwards
+
Increase value
The new values are saved
when you exit the program.
Carbonate hardness test
See included accessories
WMF 1000 user manual