WMF 1000 S User Manual page 91

Display messages
Grinder
Temperature sensor
grinder blocked
temp.sensor steam
temp.sensor water
The grinder is blocked by a foreign body.
>
Switch off the machine and pull out the mains cable.
>
Clean the bean hopper.
>
Insert the multitool (1) in the 2 holes (1a, 1b) in the
grinder.
>
Turn the grinder (1) in a clockwise direction to remove
foreign bodies.
>
Switch on the machine.
>
Start the grinder by pressing the beverage button.
>
If the grinder is free again: Reset the grinding grade.
Grinding too fi ne.
>
Set the grinding grade to be coarser
>
Switch off the coffee machine.
>
Allow the coffee machine to cool down.
>
Again switch on the coffee machine.
On recurrence, the fault must be rectifi ed by the WMF
Service-Center.
84