Installing Milk Hose - WMF 1000 S User Manual

Initial setup
2.6
In the as-delivered condition, the milk hose (6) hangs from the All-In-One spout and is packed in a plastic bag.
The water tank must remain outside the machine when fi tting the milk hose.
>
>
Hazard!
Possible danger of scalding caused by incorrect fi tting of the milk hose
If the milk hose is incorrectly fi tted it may jump out of the guide. Hot water may come out and cause scalding.
> See to it that the milk hose
11

Installing milk hose

Push the All-In-One spout to the lower position.
Insert the milk hose (6) into the guide (6d).
- does not lie in front of the water tank,
- is unstrained when the All-In-One spout is at the lowest position.
- is not kinked, so that it cannot jump out of the guide.