Ethernet Settings - Intermec PC23 User Manual

Ethernet Settings

PC23 and PC43 Desktop Printer User Manual
• Faulty Dot (Sent when a faulty dot is detected in the printhead,
which can lead to lower print quality)
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
From the printer web page, click the Configure tab,
•
Communications > Ethernet.
Ethernet Settings
Setting Description
(IPv4) IP Specifies how the printer obtains an IP
Assignment address.
Method
(IPv4) IP Address Specifies the unique network-level
address that is assigned to each device
in a TCP/IP network (IPv4).
Subnet Mask Specifies a number that defines the
range of IP addresses that can be used
in a TCP/IP network.
Default Router Specifies the IP address of a router that
is used when a device sends a packet to
another subnet or to an unknown
destination.
DHCP Response Specifies if the printer receives DHCP
responses by broadcast or unicast.
(IPv6) IP Specifies how the printer obtains an IP
Assignment address (for IPv6 networks).
Method
(IPv6) IP Address Specifies the unique network-level
address that is assigned to each device
in a TCP/IP network (IPv6).
Appendix B — Default Settings
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
145