Other Service Functions; Resetting The Periodical Replacement Parts Life; Resetting The Life Counter Of The Belt Unit; Resetting The Life Counter Of The Fuser Unit - Brother DCP-9045CDN Service Manual

2.

OTHER SERVICE FUNCTIONS

2.1

Resetting the Periodical Replacement Parts Life

2.1.1 Resetting the Life Counter of the Belt Unit

<Function>
This function allows you to reset the page counter of the belt unit and increase the number of
replacement times by one.
<Operating Procedure>
(1) Press the 3 and 9 buttons at the same time in the ready state.
The "Reset Menu" will appear on the LCD.
(2) Press the
(3) Press the OK button.
The "1. Reset 2. Exit" will appear on the LCD.
(4) Press the 1 button when resetting the page counter of the belt unit. Press the 2 button if
not resetting.
(5) The "Belt unit / Accepted" will appear on the LCD if pressing the 1 button. The page
counter of the belt unit is reset, and the number of replacement times is increased by one.
Then, the machine returns to the ready state.
If pressing the 2 button, the machine returns to the Belt unit and you need to press
Stop/Exit button to go back to the ready state without performing any operation.

2.1.2 Resetting the Life Counter of the Fuser Unit

<Function>
This function allows you to reset the page counter of the fuser unit and increase the number of
replacement times by one.
<Operating Procedure>
(1) Press the 3 and 9 buttons at the same time in the ready state.
The "Reset Menu" will appear on the LCD.
(2) Press the
(3) Press the OK button.
The "1. Reset 2. Exit" will appear on the LCD.
(4) Press the 1 button when resetting the page counter of the fuser unit. Press the 2 button if
not resetting.
(5) The "Fuser / Accepted" will appear on the LCD if pressing the 1 button. The page counter
of the fuser unit is reset, and the number of replacement times is increased by one. Then,
the machine returns to the ready state.
If pressing the 2 button, the machine returns to the Fuser and you need to press Stop/Exit
button to go back to the ready state without performing any operation.
button a few times to select "Belt unit".
button a few times to select "Fuser".
5-39 Confidential