Download Print this page

Brother MFC-9840CDW Network User's Manual

Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server.
Hide thumbs

Advertisement

Multi-Protocol On-board Ethernet Multi-function Print Server and
Wireless (IEEE 802.11b/g) Ethernet Multi-function Print Server
NETWORK
USER'S GUIDE
MFC-9840CDW
Please read this manual thoroughly before using this machine on
your network. You can view this manual in HTML format from the
CD-ROM at any time, please keep the CD-ROM in a convenient
place for quick and easy reference at all times. You can also
download the manual in PDF format from the Brother Solutions
Center (http://solutions.brother.com).
The Brother Solutions Center (http://solutions.brother.com) is
your one stop resource for all your printing needs. Download the
latest drivers and utilities for your machine, read FAQs and
troubleshooting tips or learn about special printing solutions.
Version A
ENG

Advertisement

Troubleshooting

   Related Manuals for Brother MFC-9840CDW

   Summary of Contents for Brother MFC-9840CDW

  • Page 1

    MFC-9840CDW Please read this manual thoroughly before using this machine on your network. You can view this manual in HTML format from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. You can also download the manual in PDF format from the Brother Solutions Center (http://solutions.brother.com).

  • Page 2: Compilation And Publication Notice

    Definitions of warnings, cautions, and notes We use the following icon throughout this User’s Guide: Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features. Trademarks Brother and the Brother logo are registered trademarks and BRAdmin Light and BRAdmin Professional are trademarks of Brother Industries, Ltd.

  • Page 3: Important Note

    IMPORTANT NOTE This product is approved for use in the country of purchase only. Do not use this product outside the country of purchase as it may violate the wireless telecommunication and power regulations of that country. ® ® ®...

  • Page 4: Brother Numbers

    Brother numbers IMPORTANT For technical and operational assistance, you must call the country where you purchased the machine. Calls must be made from within that country. For Customer Service In USA 1-800-284-4329 In Canada 1-877-BROTHER In Brazil helpline@brother.com.br In Europe Visit http://www.brother.com for contact information on your local Brother office.

  • Page 5

    Internet address Brother Global Web Site: http://www.brother.com For Frequently Asked Questions (FAQs), Product Support, Driver Updates and Utilities: http://solutions.brother.com (In USA Only) For Brother Accessories & Supplies: http://www.brothermall.com...

  • Page 6: Table Of Contents

    Using the Setup Wizard from the control panel .................26 Using the SecureEasySetup™ software to configure your machine for a wireless network .....28 Using the Brother automatic installer application on the CD-ROM to configure your machine for a wireless network ..........................29...

  • Page 7

    Changing the print server settings ......................30 ® Using the BRAdmin Professional utility to change the wireless settings (for Windows )....30 Using the control panel to change the print server settings...............31 Using the Remote Setup to change the print server settings ............32 Using other methods to configure your machine for a wireless network ...........32...

  • Page 8

    Specifying a different URL.......................117 Other sources of information .........................117 ® Network printing from Macintosh Overview..............................118 How to choose the BR-Script 3 printer driver (TCP/IP) .................118 Other sources of information .........................120 Web Based Management Overview..............................121 How to connect to your machine using a Browser.................122 Password information ..........................122...

  • Page 9

    Security protocols ..........................134 Security methods for E-mail notification ..................134 Configuring the protocol settings .....................135 Managing your network printer securely....................136 Secure Management using Web Based Management (web browser) ..........136 ® Secure Management using BRAdmin Professional (for Windows ) ..........137 Printing documents securely using IPPS....................138 Specifying a different URL.......................138...

  • Page 10

    Using ARP to configure the IP address ...................171 Using the Telnet console to configure the IP address ..............172 Using the Brother Web BRAdmin server software for IIS to configure the IP address....174 Installation when using a Network Print Queue or Share (printer driver only) ........174 Appendix B Print server specifications........................175...

  • Page 11: Introduction

    Driver Deployment Wizard BRAdmin Professional and Web BRAdmin are available as a download from http://solutions.brother.com. To use the Brother machine through a network, you need to configure the print server, and set up the computers you use. For Wireless Users: To achieve optimum results with normal every day document printing, place the Brother machine as close to the network access point (or router) as possible with minimal obstructions.

  • Page 12

    Introduction Due to these factors, wireless may not be the best method of connection for all types of documents and applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the fastest throughput speed.

  • Page 13: Network Features

    The Fax to Server feature allows the machine to scan documents and send them via a separate fax server. Unlike Internet fax or I-Fax, the Fax to Server feature utilizes a server to send the documents as fax data over phone or T-1 lines.

  • Page 14

    . Please also make sure that JavaScript and Cookies are always enabled in whichever browser you use. We recommend you upgrade to Safari™ 1.2 or greater to enable JavaScript. If a different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.

  • Page 15: Types Of Network Connections

    1 Switch or Router 2 Network printer (your machine) In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easier to configure than the Network Shared printing method described on the following page. See Network Shared printing on page 6.

  • Page 16: Network Shared Printing

    In a Network Shared environment, each computer sends data via a centrally controlled computer. This type of computer is often called a “Server” or a “Print Server”. Its job is to control the printing of all print jobs. 1 Client computer 2 Also known as “Server”...

  • Page 17: Wireless Network Connection Example

    (Infrastructure mode) This type of network has a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs via an access point.

  • Page 18

    An access point is on the network, but the computer is not wireless capable This type of network has a central access point at the heart of the network. The access point is connected to a computer which is not wireless capable with the Ethernet cable. When the Brother wireless machine (your machine) is a part of this network, it receives all print jobs via an access point.

  • Page 19: Protocols

    To use the DHCP/BOOTP/RARP protocols, please contact your network administrator. APIPA If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.

  • Page 20

    BRAdmin Professional. Web server (HTTP) The Brother print server is equipped with a built in web server that allows you to monitor its status or change some of its configuration settings using a web browser. Note ®...

  • Page 21

    Introduction IPv6 This machine is compatible with the IPv6, the next generation internet protocol. For more information on the IPv6 protocol, visit http://solutions.brother com.

  • Page 22: Configuring Your Machine For A Network With An Ethernet Cable Connection

    Brother CD-ROM as this will guide you through the software and network installation. If you do not wish to use the automatic installer, or you do not understand some of the terms used by the automatic installer, refer to the remainder of this chapter for more information.

  • Page 23: Subnet Mask

    Gateway (and router) A gateway is a network point that acts as an entrance to another network and sends data transmitted via the network to an exact destination. The router knows where to direct data that arrives at the gateway. If a destination is located at an external network, the router transmits data to the external network.

  • Page 24: Setting The Ip Address And Subnet Mask

    This utility is only available for Windows users. • If you are using Personal Firewall software, disable it. Once you are sure that you can print, re-start your Personal Firewall software. • Node name: Node name appears in current BRAdmin Light. The default node name of the network card in the printer is “BRNxxxxxx”...

  • Page 25

    Macintosh Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as Unconfigured in the BRAdmin Light utility screen. • You can find the node name and Ethernet address by printing the Network Configuration List. See Printing the Network Configuration List on page 105 for information on how to print the Network Configuration List on your print server.

  • Page 26: Using The Control Panel To Configure Your Machine For A Network

    77. Using other methods to configure your machine for a network You can configure your machine for a network using other methods. See Other ways to set the IP address (for advanced users and administrators) on page 169.

  • Page 27: Changing The Print Server Settings

    For Mac OS X 10.2.4 or greater users Double-click Mac OS X or Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities / BRAdmin Light.jar file. Choose the print server which you want to change the settings.

  • Page 28: Using Web Based Management (web Browser) To Change The Print/scan Settings

    (if the printer’s node name is BRN123456.) Note If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server.

  • Page 29: Using The Remote Setup To Change The Print Server Settings (not Available For Windows Server ® 2003)

    PC and displayed on your PC screen. If you change the settings, you can upload them directly to the machine. Click the Start button, All Programs , Brother, MFC-9840CDW LAN, then Remote Setup.

  • Page 30: Configuring Your Machine For A Wireless Network

    Overview To connect your machine to your wireless network, you need to follow the steps in the Quick Setup Guide. We recommend that you use the Setup Wizard from the machine’s control panel LAN menu. By using this method, you can easily connect your machine to your wireless network. Please follow the instructions in the supplied Quick Setup Guide.

  • Page 31

    An access point is on the network, but the computer is not wireless capable This type of network has a central access point at the heart of the network. The access point is connected to a computer which is not wireless capable with the Ethernet cable. When the Brother wireless machine (your machine) is a part of this network, it receives all print jobs via an access point.

  • Page 32: Confirm Your Network Environment

    Configuration temporarily using a network cable If there is an Ethernet Hub or Router in the same network as the wireless access point of your machine, you can temporarily connect the Hub or Router to the machine using an Ethernet cable (B), this is an easy way...

  • Page 33: Wireless Network Terms And Concepts

    Wireless networks use channels. Each wireless channel is on a different frequency. When configuring your Brother device to work in a wireless network, you must set it to the channel that is used on the wireless network that you are connecting to. There are up to 14 different channels that can be used when using a wireless network.

  • Page 34: Authentication And Encryption

    Most wireless networks use some kind of security settings. These security settings define the authentication (how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless device, it will not be able to connect to the wireless network.

  • Page 35: Network Key

    Uses 26 digits of hexadecimal data. e.g. “71f2234ab56cd709e5412aa2ba” WPA-PSK/WPA2-PSK and TKIP or AES Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. LEAP Uses User ID and Password. • User ID: up to a maximum of 63 characters...

  • Page 36: Configuring Your Machine For A Wireless Network

    The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use a or b key to choose your network, then press OK. Go to l.

  • Page 37

    If you chose a blank key, go to p. If you want to change the key you chose in n, press a or b to choose Change. Press OK. Go to p. If you want to keep the key you chose in n, press a or b to choose Keep. Press OK. Go to t.

  • Page 38: Using The Secureeasysetup™ Software To Configure Your Machine For A Wireless Network

    The SecureEasySetup™ software allows you to configure the wireless network easier than configuring it manually. By pushing a button on the wireless router or access point, you can complete setup and secure the wireless network. Your router or access point must also support SecureEasySetup™. See the user’s guide for your wireless LAN router or access point for instructions on how to use the SecureEasySetup™...

  • Page 39: Using The Brother Automatic Installer Application On The Cd-rom To Configure Your Machine For A Wireless Network

    Configuring your machine for a wireless network If the following message appears, press a or b to choose On, then press OK. The wired network interface will become inactive with this setting. 72.WLAN WLAN Enable? Select ab or OK The wireless network connection status using the SecureEasySetup™ software will be displayed;...

  • Page 40: Changing The Print Server Settings

    This utility is only available for Windows users. • If you are using Personal Firewall software, disable it. Once you are sure that you can print, re-start your Personal Firewall software. • Node name: Node name appears in current BRAdmin Professional window. The default Node name is “BRNxxxxxx”...

  • Page 41: Using The Control Panel To Change The Print Server Settings

    Configuring your machine for a wireless network Note • If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the device will appear as APIPA in the BRAdmin Professional utility screen. • You can find the node name and Ethernet address (Node Address above) by printing out the Network Configuration List.

  • Page 42: Using The Remote Setup To Change The Print Server Settings

    You can now change the print server settings. Using other methods to configure your machine for a wireless network You can configure your machine for a wireless network using other methods. See Other ways to set the IP address (for advanced users and administrators) on page 169.

  • Page 43: Wireless Configuration For Windows

    CD-ROM we have provided with the machine. You can also setup your machine using the machine’s control panel which we recommend. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network on page 20.

  • Page 44

    ® Wireless configuration for Windows The CD-ROM main menu will appear. Click Install Other Drivers or Utilities. (For US) (For UK) Note ® If this window does not appear, use Windows Explorer to run the start.exe program from the root folder of the Brother CD-ROM.

  • Page 45

    ® Wireless configuration for Windows Read the Important Notice and click Next. Choose Manual and then click Next.

  • Page 46

    Choose I’m not able to connect my device to my access point with a network cable and then click Next. Go to k. Connect the Brother wireless device to your access point using a network cable and click Next. Go to n...

  • Page 47

    Wireless configuration for Windows If you choose This computer has wireless capability., check I am using an access point in infrastructure mode, and then click Next. Go to l If you are using a wired computer, choose This computer uses a network cable to connect to the wireless network., you must configure the wireless settings from the control panel.

  • Page 48

    You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to its original wireless settings.

  • Page 49

    • If a message to restart your computer appears after the wireless settings have been changed, restart your computer and then go back to step 4 and continue with the install skipping steps 11, 12 and 13. • For Windows Vista™ users: You can temporarily change the wireless settings on your computer, following the steps below: Click Start and then Control Panel.

  • Page 50

    ® Wireless configuration for Windows The following list appears. If the list is blank, check if the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next. Note The default node name of the NC-xxxx (where “xxxx”...

  • Page 51

    Follow the on-screen instructions for entering the Name (SSID) and the Channel number. • If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the machine and the access point are within range for wireless communication. Then, click Refresh.

  • Page 52

    Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

  • Page 53

    Wireless configuration for Windows Follow the on-screen instructions. If you chose I’m able to temporarily connect my device to my access point with a network cable in i: Disconnect the network cable between your access point (hub or router) and the machine, and click Next.

  • Page 54

    ® Wireless configuration for Windows You have completed the wireless setup. Click Finish. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from CD-ROM menu.

  • Page 55: Configuration With An Access Point That Supports Secureeasysetup

    2000/XP or Windows Vista™ IMPORTANT If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset, Reset and choose Yes to accept the change. The machine will restart automatically.

  • Page 56

    Wireless configuration for Windows Note ® If this window does not appear, use Windows Explorer to run the start.exe program from the root folder of the Brother CD-ROM. Click Wireless LAN Setup Wizard. Read the Important Notice and click Next.

  • Page 57

    If the LCD shows Connection NG for USA or Connection error for UK, please try again. Click Finish. The configuration is finished. Relocate the machine to a location that is within range of your access point. You have completed the wireless setup. If you would like to continue installing drivers and software...

  • Page 58: Configuration In Ad-hoc Mode

    2000 Professional/XP or Windows Vista™ IMPORTANT If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset, Reset and choose Yes to accept the change. The machine will restart automatically.

  • Page 59

    Wireless configuration for Windows Note ® If this window does not appear, use Windows Explorer to run the start.exe program from the root folder of the Brother CD-ROM. Click Wireless LAN Setup Wizard. Read the Important Notice and click Next.

  • Page 60

    ® Wireless configuration for Windows Choose I’m not able to connect my device to my access point with a network cable. Click Next. Choose This computer has wireless capability, and make sure I am using an access point in infrastructure mode is not checked. Click Next.

  • Page 61

    You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to its original wireless settings.

  • Page 62

    • If a message to restart your computer appears after the wireless settings have been changed, restart your computer and then go back to step 4 and continue with the install skipping steps 9, 10 and 11. • For Windows Vista™ users: You can temporarily change the wireless settings on your computer, following the steps below: Click Start and then Control Panel.

  • Page 63

    ® Wireless configuration for Windows The following list appears. If the list is blank, check if the machine is powered on, and then click Refresh. Choose the machine you wish to configure, and click Next. Note The default node name of the NC-xxxx (where “xxxx” is your model name) is “BRWxxxxxx” (where “xxxxxx”...

  • Page 64

    Wireless configuration for Windows Note • If your target Ad-hoc network is not broadcasting the SSID name and does not appear on the list, you can manually add it by clicking the Add button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number.

  • Page 65

    Note • If you want to set more than one WEP key, click Advanced. • If you do not know the Authentication or Encryption settings for network, contact your network administrator. Enter a new SSID name and choose the Authentication Method and Encryption Mode from the pull- downs in each setting box.

  • Page 66

    Cancel. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network. To communicate with the configured wireless device, you must configure your computer to use same wireless settings.

  • Page 67

    ® Wireless configuration for Windows You have completed the wireless setup. Click Finish. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from CD-ROM menu.

  • Page 68: Wireless Configuration For Macintosh

    CD-ROM we have provided with the machine. You can also setup your machine using the machine’s control panel which we recommend. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network on page 20.

  • Page 69

    ® Wireless Configuration for Macintosh Read the Important Notice and click Next. Choose Manual and then click Next.

  • Page 70

    Choose I’m not able to connect my device to my access point with a network cable and then click Next. Go to j. Connect the Brother wireless device to your access point using a network cable and click Next. Go to m...

  • Page 71

    Wireless Configuration for Macintosh If you choose This computer has wireless capability., check I am using an access point in infrastructure mode, and then click Next. Go to k If you are using a wired computer, choose This computer uses a network cable to connect to the wireless network., you must configure the wireless settings from the control panel.

  • Page 72

    You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to its original wireless settings.

  • Page 73

    ® Wireless Configuration for Macintosh The following list appears. If the list is blank, check if the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next. Note The default node name of the NC-xxxx (where “xxxx”...

  • Page 74

    Follow the on-screen instructions for entering the Name (SSID) and the Channel number. • If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if the machine and the access point are within range for wireless communication. Then, click Refresh.

  • Page 75

    Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

  • Page 76

    Wireless Configuration for Macintosh Follow the on-screen instructions. If you chose I’m able to temporarily connect my device to my access point with a network cable in h: Disconnect the network cable between your access point (hub or router) and the machine, and click Next.

  • Page 77: Configuration With An Access Point That Supports Secureeasysetup

    X 10.2.4 or greater IMPORTANT If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset, Reset and choose Yes to accept the change. The machine will restart automatically.

  • Page 78

    Read the Important Notice and click Next. Make the following selection and click Next. Confirm the on-screen message and click Next. Refer to the instruction manual that came with your access point to set the SecureEasySetup™ mode of your access point.

  • Page 79

    If the LCD shows Connection NG for USA or Connection error for UK, please try again. Click Finish. The configuration is finished. Relocate the machine to a location that is within range of your access point. You have completed the wireless setup. If you would like to continue installing drivers and software...

  • Page 80: Configuration In Ad-hoc Mode

    X 10.2.4 or greater IMPORTANT If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Factory Reset, Reset and choose Yes to accept the change. The machine will restart automatically.

  • Page 81

    ® Wireless Configuration for Macintosh Read the Important Notice and click Next. Choose Manual and then click Next. Choose I’m not able to connect my device to my access point with a network cable. Click Next.

  • Page 82

    You need to temporarily change your computer’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your computer. You will need them to return your computer back to its original wireless settings.

  • Page 83

    Click Next. The following list appears. If the list is blank, check if the machine is powered on, and then click Refresh. Choose the machine you wish to configure, and click Next.

  • Page 84

    Wireless Configuration for Macintosh Note • If your target Ad-hoc network is not broadcasting the SSID name and does not appear on the list, you can manually add it by clicking the Add button. Follow the on-screen instructions for entering the Name (SSID) and the Channel number.

  • Page 85

    Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

  • Page 86

    Click Next. (The settings shown on this screen are for example only. Your settings will not be the same.) You have completed the wireless setup. Click Finish. If you would like to continue installing drivers and...

  • Page 87: Control Panel Setup

    Macintosh , which also can be used to configure many aspects of the network. See Changing the print server settings on page 17 for a wired connection or Changing the print server settings on page 30 for a wireless connection.

  • Page 88

    Auto mode In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address to the machine, then the IP address supplied by the DHCP server will be used.

  • Page 89

    IP Address This field displays the current IP address of the machine. If you have chosen a BOOT Method of Static, enter the IP address that you wish to assign to the machine (check with your network administrator for the IP address to use).

  • Page 90

    This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank.

  • Page 91

    Press OK. Press Stop/Exit. Auto Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS servers. You must set the BOOT Method to Auto for this feature to work. Static Uses a specified IP address for the primary and secondary WINS servers.

  • Page 92

    Secondary WINS Server IP Address This field specifies the IP address of the secondary WINS server. It is used as a backup to the Primary WINS server address. If the Primary server is unavailable, the machine still can register itself with a secondary ®...

  • Page 93

    Secondary DNS Server IP Address This field specifies the IP address of the secondary DNS server. It is used as a backup to the Primary DNS server address. If the Primary server is unavailable, the machine will contact the Secondary DNS server. If you have a primary DNS server, but no secondary DNS server, simply leave this field blank.

  • Page 94

    Press Stop/Exit. IPv6 This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6 protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit http://solutions.brother.com.

  • Page 95: Ethernet (wired Network Only)

    Control panel setup Ethernet (wired network only) Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T full or half duplex mode by auto negotiation. You can fix the server link mode to 100BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BASE-T Full Duplex (10B-FD) or Half Duplex (10B-HD).

  • Page 96: Wlan Status (wireless Network Only)

    Active, WLAN OFF or Connection NG (for USA) / Connection error (for UK). Press Stop/Exit. Signal This field displays the current wireless network signal strength; Strong, Medium, Weak or None. Press Menu. Press a or b to choose LAN. Press OK.

  • Page 97

    Control panel setup SSID This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID name. Press Menu. Press a or b to choose LAN. Press OK. Press a or b to choose WLAN.

  • Page 98: Set To Default

    Set to Default The Set to Default allows you to reset each wired or wireless settings to the default. If you want to reset both wired and wireless settings, see Restoring the network settings to factory default on page 104.

  • Page 99: Wlan Enable (wireless Network Only)

    This menu has nine selections: Mail Address, SMTP Server, SMTP Port, Auth. for SMTP, POP3 Server, POP3 Port, Mailbox Name, Mailbox Pwd and APOP. As this section requires you to enter a lot of text characters, you may find that it is more convenient to use your favorite web browser to configure these settings.

  • Page 100

    Control panel setup SMTP Server This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your network. (Ex, “mailhost.brothermail.net” or “192.000.000.001”) Press Menu. Press a or b to choose LAN. Press OK.

  • Page 101

    Control panel setup Auth. for SMTP You can specify the security method for E-mail notification. For details on security methods for E-mail notification, see Security methods for E-mail notification on page 134. Press Menu. Press a or b to choose LAN.

  • Page 102

    Control panel setup POP3 Server This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the Brother machine. This address is necessary for the Internet fax features to function correctly. (Ex, “mailhost.brothermail.net” or “192.000.000.001”) Press Menu.

  • Page 103

    Control panel setup Mailbox Name You can specify a mailbox name on the POP3 server where the internet print jobs are to be retrieved. Press Menu. Press a or b to choose LAN. Press OK. Press a or b to choose Setup IFAX.

  • Page 104: Setup Mail Rx (of Setup Ifax Menu)

    Press Stop/Exit. Setup Mail RX (of Setup IFAX menu) This menu has five selections: Auto Polling, Poll Frequency, Header, Del Error Mail and Notification. Auto Polling When set to On, the machine automatically checks the POP3 server for new messages.

  • Page 105

    Enter the polling frequency. Press OK. Press Stop/Exit. Header This selection allows the contents of the mail header to be printed when the received message is printed. Press Menu. Press a or b to choose LAN. Press OK. Press a or b to choose Setup IFAX.

  • Page 106

    Control panel setup Del Error Mail When set to On, the machine automatically deletes error mails that the machine can not receive from the POP server. Press Menu. Press a or b to choose LAN. Press OK. Press a or b to choose Setup IFAX.

  • Page 107: Setup Mail Tx (of Setup Ifax Menu)

    This menu has three selections: Sender Subject, Size Limit and Notification. Sender Subject This field displays the subject that is attached to the Internet fax data being sent from the Brother machine to a computer (default is “Internet fax job”).

  • Page 108

    E-mail size). With this function enabled, the machine will display Out of Memory when trying to send E-mail documents over 1 Mbyte in size. The document will not be sent and an error report will be printed. The document you are sending should be separated into smaller documents that will be accepted by the mail server.

  • Page 109: Setup Relay (of Setup Ifax Menu)

    Relay Broadcast, see Relay broadcasting on page 128 of this User’s Guide. Rly Broadcast This function allows the machine to receive a document over the Internet, and then relay it to other fax machines through conventional analog landlines. Press Menu.

  • Page 110: Scan To E-mail (e-mail Server)

    Press a or b to choose PDF or JPEG if you chose Color 150 dpi, Color 300 dpi or Color 600 dpi in d. Press a or b to choose PDF or TIFF if you chose B&W 200 dpi or B&W 200x100 dpi in d. Press OK.

  • Page 111: Scan To Ftp

    Press a or b to choose PDF or JPEG if you chose Color 150 dpi, Color 300 dpi or Color 600 dpi in d. Press a or b to choose PDF or TIFF if you chose B&W 200 dpi or B&W 200x100 dpi in d. Press OK.

  • Page 112: Fax To Server

    In most cases the syntax for the prefix is “fax=” and the syntax for the suffix would be the domain name of the fax server E-mail gateway.

  • Page 113: Time Zone

    The machine will send the message over a TCP/IP network to the fax server. Time Zone This field displays your country time zone. The time shown is the time difference between your country and Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is UTC-05:00.

  • Page 114: Restoring The Network Settings To Factory Default

    Control panel setup Restoring the network settings to factory default If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default.

  • Page 115: Printing The Network Configuration List

    Node name: Node name appears in the Network Configuration List. The default node name is “BRNxxxxxx” for a wired network or “BRWxxxxxx” for a wireless network (where “xxxxxx” is the last six digits of the Ethernet address) (up to 15 characters).

  • Page 116: Driver Deployment Wizard (windows ® Only)

    The Driver Deployment Wizard can also be used to create self running executable files which when run on a remote PC, completely automate the installation of a printer driver. The remote PC does not have to be connected to a network.

  • Page 117: Network Shared

    Driver Deployment Wizard (Windows only) Network Shared The device is connected to a network and a central print queue is used to manage all print jobs. 1 Client computer 2 Also known as “Server” or “Print Server” 3 TCP/IP or USB...

  • Page 118: How To Install The Driver Deployment Wizard Software

    How to install the Driver Deployment Wizard software Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.

  • Page 119: Using The Driver Deployment Wizard Software

    IP address, subnet mask and also the gateway address. Choose the printer you wish to install, and then click Next. If the driver you wish to use is not installed on your computer, click Have Disk and then specify the path of the printer driver.

  • Page 120

    Note If you work in a "queue" based network and you create an executable file for another user who does not have access to the same printer queue that you define into the executable file, the driver when installed on the remote computer will default to LPT1 printing.

  • Page 121: Network Printing From Windows Basic Tcp/ip Peer-to-peer Printing

    Note • You must configure the IP address on your machine before you proceed with this chapter. If you need to configured the IP address, see Setting the IP address and subnet mask on page 14 first.

  • Page 122: Other Sources Of Information

    Other sources of information See Configuring your machine for a network with an Ethernet cable connection on page 12 and Configuring your machine for a wireless network on page 20 to learn how to configure the IP address of the printer.

  • Page 123: Internet Printing For Windows

    2003 installation. Note • You must configure the IP address on your printer before you proceed with this chapter. If you need to configure the IP address, see Chapter 2 first. • Verify the host computer and print server are either on the same subnet, or that the router is properly configured to pass data between the two devices.

  • Page 124

    Go to g. If your printer is not in the list of supported printers, click Have Disk. You will then be asked to insert the driver disk. Click Browse and choose the appropriate Brother printer driver that is contained in the CD-ROM or in the network share.

  • Page 125: For Windows ® 2000/xp And Windows Server ® 2003

    (Where “printer’s IP address” is the printer’s IP address or the node name). Note If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server.

  • Page 126

    If the printer driver has NOT been installed: One of the benefits of the IPP printing protocol is that it establishes the model name of the printer when you communicate with it. After successful communication you will see the model name of the ®...

  • Page 127: Specifying A Different Url

    Please note that there are several possible entries that you can enter for the URL field. http://printer’s IP address:631/ipp This is the default URL and we recommend that you use this URL. Please note the Get More Info option will not display any printer data.

  • Page 128: Network Printing From Macintosh

    ® on a Network using Mac OS X 10.2.4 or greater. For more information on how to install the Brother standard printer driver on a Network, see the Quick Setup Guide included with the printer. How to choose the BR-Script 3 printer driver (TCP/IP) Turn the power of the machine ON.

  • Page 129

    X 10.2.4 to 10.3.x) Note • The Network Configuration List will allow you to confirm the IP address. For more information on how to print the configuration page, see Printing the Network Configuration List on page 105. • When specifying the Queue Name, use the value “brnxxxxxx_p1_at” (where xxxxxx are the last 6 digits...

  • Page 130: Other Sources Of Information

    X 10.2.4 to 10.3.x) (Mac OS X 10.4) Click Add and the printer will be available from the Printer List. Other sources of information See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer.

  • Page 131: Web Based Management

    If a different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1. You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print server and your computer.

  • Page 132: How To Connect To Your Machine Using A Browser

    Type “http://printer’s IP address/” into your browser (where “printer’s IP address” is the printer’s IP address or the node name.)(You can also use the NetBIOS name of the printer server, if you are in a Microsoft domain/Workgroup environment). Enter the DNS name of the machine if connecting to a network that uses the DNS protocol.

  • Page 133: Changing The Ldap Configuration Using A Browser

    Web Based Management Changing the LDAP configuration using a Browser You can configure and change the LDAP settings using a web browser. LDAP Enable/Disable LDAP Server Address Port (The default port number is 389.) Timeout for LDAP Authentication Username Password...

  • Page 134: Ldap Operation

    Press Search/Speed Dial or OK. The LDAP search result will be shown on LCD before the local address book search result with c. If there is no match on the server and the local address book, the LCD will show No Contact Found for 2 seconds.

  • Page 135: Internet Fax

    TIFF-F files, you can use Microsoft® Imaging or a TIFF-F viewer application. Any documents sent via the machine will automatically be converted into a TIFF-F format. If you wish to send and receive messages to and from your machine, your mail application on the computer must be able to support the MIME format.

  • Page 136: Control Panel Key Functions

    Dial Pad Used to enter Standard Alpha characters (26 letters), as well as @. space ! “ # % & ’ () + / : ; < > = ? [ ] ^ - $ , l _ and Numbers.

  • Page 137: Manually Entering Text

    Oceanic machines, Memory receive must be switched “ON”.) If the received mail is not in a plain text format or an attached file is not in the TIFF-F format, the following error message will be printed: “ATTACHED FILE FORMAT NOT SUPPORTED. FILE NAME:XXXXXX.doc”...

  • Page 138: Receiving An Internet Fax To Your Computer

    If you wish to use your machine as a relay broadcast device, you must specify the domain name that you trust at the machine, in other words, the portion of the domain after the “@” sign.

  • Page 139

    E-mail address of the machine [I.E. UKFAX@brother.co.uk] that will forward the document followed by the phone number of the fax that will receive the document. The following is an example of how to enter the E-mail address and phone number UKFAX@brother.co.uk(fax#123456789)

  • Page 140: Tx Verification Mail

    Enter the address of the relay machine and phone number of the fax in the “TO” box using the same method used when sending from an machine.

  • Page 141: Setup Mail Tx

    Error mail If there is a mail delivery error while sending an Internet fax, the mail server will send an error message back to the machine and the error message will be printed. If there is an error while receiving mail, an error...

  • Page 142: Important Information On Internet Fax

    Factors such as the receiver’s location, structure of the LAN system, and how busy the circuit (such as the internet) is, may cause the system to take a long time to send back an error mail. (normally 20 sec. to 30 sec.).

  • Page 143: Security Features

    CSR (Certificate Signing Request) A CSR is a message sent from an applicant to a CA in order to apply for issue of a certificate. The CSR contains information identifying the applicant, the public key generated by the applicant and the digital signature of the applicant.

  • Page 144: Security Protocols

    18. POP before SMTP (PbS) The user authentication method for sending E-mail from a client. The client is given permission to use the SMTP server by accessing the POP3 server before sending the E-mail.

  • Page 145: Configuring The Protocol Settings

    Note If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter the NetBIOS name of the print server.

  • Page 146: Managing Your Network Printer Securely

    Note If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server.

  • Page 147: Secure Management Using Bradmin Professional (for Windows ® )

    To use the BRAdmin Professional utility securely, you need to follow the points below. We strongly recommend to use the latest version of the BRAdmin Professional utility or Web BRAdmin that are available as a download from http://solutions.brother.com. If you use an older version of BRAdmin to manage your brother devices the user authentication will not be secure.

  • Page 148: Printing Documents Securely Using Ipps

    Please note that there are several possible entries that you can enter for the URL field. https://Common Name/ipp This is the default URL and we recommend that you use this URL. Please note the Get More Info option will not display any printer data.

  • Page 149: Using E-mail Notification With User Authentication

    Note If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the NetBIOS name of the print server.

  • Page 150

    You can configure the POP3/SMTP settings on this page. Note • You can also change the SMTP port number using Web Based Management. This is useful if your ISP (Internet Service Provider) implements the “Outbound Port 25 Blocking (OP25B)” service, and you are not using the ISP’s SMTP server.

  • Page 151: Creating And Installing A Certificate

    143. Using a certificate from a CA There are two methods for installing a certificate from a CA. If you already have a CA or if you want to use a certificate from an outside trusted CA: • When using a CSR (Certificate Signing Request) from this print server. See Creating CSR and installing a certificate on page 155.

  • Page 152

    Note If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter the NetBIOS name of the print server.

  • Page 153: Creating And Installing A Self-signed Certificate

    SSL/TLS communication. The node name is displayed by default. • A warning will pop-up if you enter a different name in the URL than the Common Name that was used for the self-signed certificate.

  • Page 154

    How to install the self-signed certificate on your computer Note The following steps are for Microsoft Internet Explorer. If you use another web browser, follow the help text of the web browser itself. For Windows Vista™ users that have administrator rights Click Start and All Programs.

  • Page 155

    Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s IP address or the node name). Then, click Continue to this website (not recommended). Click Certificate Error, and then click View certificates. For the rest of the instructions, follow the steps from d on page 152.

  • Page 156

    For Windows Vista™ users that do not have administrator rights Click Start and All Programs. Right click Internet Explorer, and then click Run as administrator. Choose the Administrator that you want to install with and enter the administrator password, and then click OK.

  • Page 157

    Security features Type “https://printer’s IP address/” into your browser to access your printer (where “printer’s IP address” is the printer’s IP address or the node name). Then, click Continue to this website (not recommended). Click Certificate Error, and then click View certificates.

  • Page 158

    Security features Click Next. Make sure that DER encoded binary X.509 (.CER) is chosen, and then click Next. Click Browse..

  • Page 159

    Security features Click Browse Folders. Choose a folder you want to save the certificate file in and enter a file name, and then click Save. Note If you choose Desktop, the certificate file is saved to the Desktop of the Administrator that you chose.

  • Page 160

    Security features Click Finish. Click OK. Click OK.

  • Page 161

    Security features Open the folder that you saved the certificate file in k and double-click the certificate file. For the rest of the instructions, follow the steps from d on page 152. ® ® For Windows 2000/XP and Windows Server 2003 users Start your web browser.

  • Page 162

    Security features Click Install Certificate… from the General tab. When the Certificate Import Wizard appears, click Next. Choose Place all certificates in the following store and then, click Browse..

  • Page 163

    Security features Choose Trusted Root Certification Authorities and then, click OK. Click Next. Click Finish.

  • Page 164

    Security features Click Yes, if the fingerprint (thumbprint) is correct. Note The fingerprint (thumbprint) is printed on the Network Configuration List. To learn how to print the Network Configuration List, see Printing the Network Configuration List on page 105. Click OK.

  • Page 165: Creating Csr And Installing A Certificate

    SSL/TLS communication. The node name is displayed by default. The Common Name is required. • A warning will pop-up if you enter a different name in the URL than the Common Name that was used for the certificate.

  • Page 166

    If you enable them, the user authentication is not secure. • A check box only appears for an individual protocol or the older BRAdmin utility if they are already enabled. ® BRAdmin Professional older than Ver. 2.80, Web BRAdmin older than Ver. 1.40, BRAdmin Light for Macintosh older than Ver.

  • Page 167: Import And Export The Certificate And Private Key

    If you enable them, the user authentication is not secure. • A check box only appears for an individual protocol or the older BRAdmin utility if they are already enabled. ® BRAdmin Professional older than Ver. 2.80, Web BRAdmin older than Ver. 1.40, BRAdmin Light for Macintosh older than Ver.

  • Page 168

    Security features How to export the certificate and private key Click Export Certificate and Private Key on the Configure Certificate page. Enter the password if you want to encrypt the file. Note If a blank password is used, the output is not encrypted.

  • Page 169: Troubleshooting

    Overview This chapter explains how to resolve typical network problems you may encounter when using the machine. If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center at: http://solutions.brother.com This chapter is divided into the following sections:...

  • Page 170: Network Print Software Installation Problems

    ® Mac OS Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 of this User’s Guide before installing the network print software or printer driver. For a network with an Ethernet cable connection Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 of this User’s Guide before installing the network print software or printer driver.

  • Page 171

    IP address after setting the IP address). If you have tried a to d above and it does not work, then reset the print server back to the default factory settings and try from the initial setup again. For information on how to reset to the default factory settings, see Restoring the network settings to factory default on page 104.

  • Page 172: Printing Problems

    IP address after setting the IP address). If you have tried a to c above and it does not work, then reset the print server back to the default factory settings and try from the initial setup again. For information how to reset to the default factory settings,...

  • Page 173

    Error during printing If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with high resolution), the printer is unable to accept your print job until the ongoing printing is finished. If the waiting time of your print job exceeds a certain limit, a time out situation occurs, which causes the error message.

  • Page 174: Scanning And Pc Fax Problems

    Firewall settings on your PC may be rejecting the necessary network connection. Follow the instructions below to disable the Firewall. if you are using a Personal Firewall software, see the User’s Guide for your software or contact the software manufacturer.

  • Page 175

    Make sure that the new setting is added and is checked, and then click Apply. If you still have trouble with your network connection such as network scanning or printing, check File and Printer Sharing box in the Exceptions tab and then click Apply.

  • Page 176: Wireless Network Troubleshooting

    Move your computer closer to the Brother machine and try again. Reset the print server back to its default factory settings and try again. For the information how to reset to the factory default settings, see Restoring the network settings to factory default on page 104.

  • Page 177: Protocol-specific Troubleshooting

    I want to use a different Port number other than 631. If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data through.

  • Page 178: Ldap Troubleshooting

    Troubleshooting LDAP troubleshooting ® If you are having trouble connecting to a Windows LDAP server, please contact your Network Administrator and check the LDAP Security Options. For more information, please visit http://solutions.brother.com.

  • Page 179: A Appendix A

    Appendix A Using services A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands.

  • Page 180: Using Bootp To Configure The Ip Address

    Depending on the system, this entry might be called “bootps” instead of “bootp”. Note In order to enable BOOTP, simply use an editor to delete the “#” (if there is no “#”, then BOOTP is already enabled). Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network type (1 for Ethernet), Ethernet address and the IP address, subnet mask and gateway of the print server.

  • Page 181: Using Rarp To Configure The Ip Address

    00:80:77:31:01:07 BRN310107 Where the first entry is the Ethernet address of the print server and the second entry is the name of the print server (the name must be the same as the one you put in the /etc/hosts file).

  • Page 182: Using The Telnet Console To Configure The Ip Address

    Type Telnet <command line> at the command prompt of the system prompt, where <command line> is the IP address of the print server. When you are connected, push the Return or Enter key to get the “#” prompt. Enter the password “access” (the password will not appear on the screen).

  • Page 183

    255.255.255.0 for class C networks The leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 192 through 255 for Class C networks (e.g., 192.168.1.4).

  • Page 184: Using The Brother Web Bradmin Server Software For Iis To Configure The Ip Address

    (printer driver only) Note • You must configure the IP address on your machine before you proceed with this section. If you have not configured the IP address, see Configuring your machine for a network with an Ethernet cable connection on page 12 first.

  • Page 185: B Appendix B

    Appendix B Print server specifications Ethernet wired network Network Board NC-6500h Model name You can connect your machine to a network for Network Printing, Network Scanning, PC Fax and Remote Setup. Support for ® ® Windows 2000 Professional, Windows ®...

  • Page 186: Ethernet Wireless Network

    Appendix B Ethernet wireless network Network board NC-7300w model name You can connect your machine to a network for Network Printing, Network Scanning, PC Fax and Remote Setup Support for ® ® Windows 2000 Professional, Windows ® ® Windows XP Professional x64 Edition, Windows Vista™, Windows Server 2003 and ®...

  • Page 187

    Link distance 70m (233 ft.) at lowest data rate (The distance rate will vary upon environment and other equipment location.) Network SSID/ESSID, 128 (104) / 64 (40) bit WEP, WPA/WPA2-PSK (TKIP/AES), LEAP (CKIP) security ® PC Fax Send for Mac ®...

  • Page 188: Computer Requirements

    Wireless Solo/Duo, PowerPC Scanning 802.11 b/g G3 350MHz For WIA, 1200x1200 resolution. Brother Scanner Utility enables to enhance up to 19200 x 19200 dpi. Third party USB ports are not supported. PC Fax supports black and white only. ® ®...

  • Page 189: Authentication And Encryption For Wireless Users Only

    Brother wireless product to associate with access points using CKIP and CMIC encryptions. Encryption methods Encryption is used to secure the data that is sent over the wireless network. The Brother machine supports the following encryption methods: By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.

  • Page 190

    • 128 (104) bit hexadecimal: Uses 26 digits of hexadecimal data. e.g.“71f2234ab56cd709e5412aa2ba” WPA-PSK/WPA2-PSK and TKIP or AES Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. LEAP Uses User ID and Password.

  • Page 191: Function Table And Default Factory Settings

    Appendix B Function table and default factory settings The factory settings are shown in Bold with an asterisk. Main Menu Submenu Menu Selections Options 7.LAN 1.Wired 1.TCP/IP 1.BOOT Method Auto* Static RARP BOOTP DHCP [000-255]. [000-255]. 2.IP Address [000-255]. [000-255] [000-255].

  • Page 192

    Appendix B Main Menu Submenu Menu Selections Options — 7.LAN 1.Wired 3.Set to Default 1.Reset (continued) (continued) — 2.Exit 4.Wired Enable 2.WLAN 1.TCP/IP 1.BOOT Method Auto* Static RARP BOOTP DHCP [000-255]. [000-255]. 2.IP Address [000-255]. [000-255] [000-255]. [000-255]. 3.Subnet Mask [000-255].

  • Page 193

    Connection error (for UK) 2.Signal Strong Medium Weak None — 3.SSID 4.Comm.Mode Ad-hoc Infrastructure — 5.Set to Default 1.Reset — 2.Exit 6.WLAN Enable Off* — 3.Setup IFAX 1.Setup Internet 1.Mail address Name? 2.SMTP Server (Up to 64 characters) IP Address? [000-255].[000-255].

  • Page 194

    4.Setup Relay 1.Rly Broadcast Off* 2.Relay Domain RelayXX: 3.Relay Report Off* 4.Scan to E-mail — (If you chose color option) Color 150 dpi Color 300 dpi PDF* Color 600 dpi JPEG (If you chose B&W option) B&W 200 dpi PDF* B&W 200x100 dpi...

  • Page 195

    6.Fax to Server Off* — — 7.Time Zone UTC-XX:XX — 0.Factory Reset 1.Reset 1.Yes 2.No — — 2.Exit On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.

  • Page 196: Entering Text

    Inserting spaces To enter a space in a fax number, press c once between numbers. To enter a space in a name, press c twice between characters. Making corrections If you entered a letter incorrectly and want to change it, press d to move the cursor to the incorrect character,...

  • Page 197

    : ; < = > ? @ [ ] ^ _ ¥ ˜ ‘ | { } Press 0 (For USA) Á À Ã Â Ç É È Ê Ë Í Î Ï Ó Õ Ô Ö Œ Ú Ù Û 0 (For UK) Ä Ë Ö Ü À Ç È É 0...

  • Page 198: C Appendix C

    Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

  • Page 199

    Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

  • Page 200: Openldap Statements

    Redistribution and use in source and binary forms are permitted provided that this notice is preserved and that due credit is given to the University of Michigan at Ann Arbor. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. This software is provided “as is”...

  • Page 201

    The OpenLDAP Foundation may revise this license from time to time. Each revision is distinguished by a version number. You may use this Software under terms of this license revision or under the terms of any subsequent revision of the license.

  • Page 202

    However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

  • Page 203

    DHCP ............9 Digital signature ............133 DNS client ..............9 DNS server ............... 83 Domain ......114 Open Source Licensing Remarks ......188 Open system ............. 24 Driver Deployment Wizard ........1 Operating systems ............1 Encryption ..............24 Password ..............113 PCL_P1 ..............

  • Page 204

    Index RARP ............9 Remote Setup ..........1 Restoring the network settings ........ 104 RFC 1001 ..............169 SecureEasySetup™ ........28 Security terms ............133 Service ..............169 Shared key ..............24 Shared key cryptosystem ........133 ® Simple Network Configuration for Mac OS X ..

This manual also for:

9840cdw - color laser - all-in-one

Comments to this Manuals

Symbols: 0
Latest comments: