Brother DCP-9045CDN Service Manual page 212

Assembling Note:
- When assembling each of the SB roller ASSY, LF roller 2/3/4 ASSYs and Exit roller
ASSY, make sure to assemble it onto the correct position.
Identify each roller by the color or three shades of the rollers.
* The shades of the LF
roller 2 ASSY and Exit
roller ASSY are the
same.
* It is recommended to mark each of the roller ASSYs when disassembling them.
Failure to assemble each roller ASSY onto the correct position may cause paper jam or
stretching image.
(27) Remove the two screw pan (S/P washer) M3x6, and then remove the ADF motor.
Screw pan (S/P washer)
M3x6
Motor frame ASSY DX
* Gray (Identify the rollers by the shades.)
* Light purple
Fig. 3-78
ADF motor
Fig. 3-79
3-79
LF roller 3 ASSY
LF roller 2 ASSY
Exit roller ASSY
LF roller 4 ASSY
SB roller ASSY
Confidential