Brother DCP-9045CDN Service Manual page 339

Assembling Note:
When assembling the F roller shaft LT, place the Rib of the Paper feed frame unit between
the section "A" and "B" of the Lift lever B and align the section "B" with the Lever of the
Paper feed holder.
Lift lever A
Paper feed frame unit
(6) Remove the two cup S M3x6 Taptite screws from the LT frame unit.
"A"
Lift lever B
Rib
Fig. 3-312
LT paper feed frame unit
<Right side>
LT frame unit
Fig. 3-313
3-206
"B"
Lever
F roller shaft LT
Paper feed holder
Taptite, cup S M3x6
Confidential