Back Cover Assy - Brother DCP-9045CDN Service Manual

Assembling Note:
(1) Put the Drive shaft holder into the Shaft of the Frame unit.
(2) Align the Hook and Pin of the Drive shaft holder with the hole on the Paper eject ASSY DX
while inclining the Drive shaft holder 10 degrees downwards.
(3) Move the Drive shaft holder to the direction of the arrow 3 to align it with the screw hole of
the Paper eject ASSY DX, and secure the Drive shaft holder with the bind B M3x10 Taptite
screw.
Pin
Hook
1
Drive shaft holder

8.8 Back Cover ASSY

(1) Remove the two cup S M3x8 Taptite screws, and then remove the Back cover ASSY.
Hook
Taptite, cup S M3x8
Hole
Paper eject ASSY DX
Hole of screw
2
Shaft of the Frame unit
Drive shaft holder
Fig. 3-26
Hook
Fig. 3-27
3-48
Paper eject ASSY DX
3
Taptite, bind B M3x10
Taptite, cup S M3x8
Back cover ASSY
<Back side>
Confidential