Brother DCP-9045CDN Service Manual page 277

(5) Remove the Collar 3 from the Hinge shaft R, and then remove the Hinge shaft R from the
Hinge plate R.
(6) Remove the Front door unit ASSY from Frame unit.
Hinge plate R
Hinge shaft R
Assembling Note:
- When assembling the Wire rope onto the Shaft on the main body, be careful of the direction of
Wire rope referring to the figure below.
Shaft
Frame unit
Collar 3
Fig. 3-199
Wire rope
Shaft
Shoulder screw
Fig. 3-200
3-144
Front door unit ASSY
<Front>
Wire rope
Shoulder screw
Confidential