Brother DCP-9045CDN Service Manual page 418

The functions and settings for each worker switch (WSW) are described below;
< WSW01 >
Selector No.
1
Dial pulse generation mode
2
3
Break time length in pulse
dialing
4
5
Inter-digit pause
6
Switching between pulse and
7 tone dialing, by the function
switch
Default dialing mode, pulse
8
(DP) or tone (PB) dialing
- Selectors 1 and 2: Dial pulse generation mode
These selectors set the number of pulses to be generated in pulse dialing.
N: Dialing "N" generates "N" pulses. (Dialing "0" generates 10 pulses.)
N + 1: Dialing "N" generates "N + 1" pulses.
10 - N: Dialing "N" generates "10 – N" pulses.
- Selectors 3 and 4: Break time length in pulse dialing
These selectors set the break time length in pulse dialing.
(Example: If "1," "2," and "3" are dialed when N is set by selectors 1 and 2.)
Function
No. 1
No. 3
No. 5
App. 1-3
Setting and Specifications
2
0 0 : N
0 1 : N+1
1 0 : 10-N
1 1 : N
4
0 0 : 60 ms
0 1 : 67 ms
1 0 : 40 ms
1 1 : 64 ms (for 16 PPS)
6
0 0 : 800 ms
0 1 : 850 ms
1 0 : 950 ms (for 16 PPS)
1 1 : 600 ms (at 106-ms intervals)
0: Yes 1: No
0: PB 1: DP
Confidential