Brother DCP-9045CDN Service Manual page 120

(19) Assemble the Side plate LB with the three cup S M3x6 Taptite screws, one cup B M4x12
Taptite screw and one cup S M4x8 Taptite screw.
Taptite, cup S M4x8
Side plate LB
Taptite, cup B M4x12
(Tightening torque: 1.20 ±0.1 N m)
Taptite, cup S M3x6
(20) Catch the Hooks of the Side cover L ASSY with the main body and fix the Side cover L
ASSY with the one cup S M3x8 Taptite screw and three cup B M4x12 Taptite screws.
Note:
When assembling the Side cover L ASSY, pay attention to the Wire support rope.
Taptite, cup B M4x12
(Tightening torque:
1.20 ±0.1 N m) *1
Side cover L ASSY
*1
Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the
screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly
turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according
to the specified torque with a screwdriver.
*1
<Left side>
Hook
Hooks
Taptite, cup S M3x8
Hooks
Fig. 2-42
<Left side>
Taptite, cup B M4x12
(Tightening torque: 1.20 ±0.1 N m)
Fig. 2-43
2-26
Wire support rope
*1
Confidential