Brother DCP-9045CDN Service Manual page 84

(3) Communication code compatibility [checking the NSF and DIS]
1 Code 2
32
32
32
32
32
32
32
32
(4) Instructions received from the remote terminal [checking the NSC, DTC, NSS, and DCS]
Code 1 Code 2
40
40
40
40
40
40
40
40
40
(5) Command reception [checking the NSF and DIS after transmission of NSS and DCS]
Code 1 Code 2
50
01 Remote terminal only with V.29 capability in 2400 or 4800
bps transmission.
02 Remote terminal not ready for polling.
10 Remote terminal not equipped with password function or its
password switch OFF.
11 Remote terminal not equipped with or not ready for
confidential mailbox function.
12 Remote terminal not equipped with or not ready for relay
broadcasting function.
13 No confidential mail in the remote terminal.
14 The available memory space of the remote terminal is less
than that required for reception of the confidential or relay
broad-casting instruction.
18 Remote terminal not equipped with color function.
02 Illegal coding system requested.
03 Illegal recording width requested.
05 ECM requested although not allowed.
06 Polled while not ready.
07 No document to send when polled.
10 Nation code or manufacturer code not correct.
13 Polled by any other manufacturers' terminal while waiting for
secure polling.
17 Invalid resolution selected.
20 Invalid full color mode selected.
01 Vertical resolution capability changed after compensation of
background color.
1-65
Causes
Causes
Causes
Confidential