To Leave The Service Position - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions
5
2
Lift off the drive belt (1). Now pull out the pin (2).
Make sure not to trap your hand.
6
Pull the frame forwards and replace the pin.
7
Grip the front edge of the deck, and pull out and lift
it up to the service position.
Or:
1
www.mymowerparts.com
If the cylindrical bolt, which is now holding the
mowing deck is removed, the mowing deck can be
lifted off.

To leave the service position

To leave the service position, reverse the
procedures set out in "Placing in the service posi-
tion". Make sure that the "lug" on the mowing deck
enters the clamp correctly on the underside of the
machine, see diagram.
51
Svenska –