Reparation Instructions; Removing Engine - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Removing engine

1
Remove the engine hood on ProFlex. On Pro 15 it
can be left on.
2
Release the battery's fixing belt. Remove the safety
guard.
IMPORTANT INFORMATION
Brace the screws for the battery cables to
avoid exposing the terminals to stress.
Release the battery cable connections. Now lift out
the battery.

Reparation instructions

www.mymowerparts.com
3
Remove the cable which runs between the starter
relay and starter motor from the starter motor.
Mark up and remove the engine's electrical
connections.
4
Remove the clamps which hold the throttle and
choke wires. Unhook the wires from their
attachment in the carburettor. The picture shows
ProFlex 21. För Pro 15 and ProFlex 18, see
"Replacing engine".
21
Svenska –