Driving - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Driving

Rider Pro and Rider ProFlex are equipped with
hydrostatic transmission which provides the driver
complete control. Continuously variable speed
control, forwards and reverse, is by means of a foot
pedal.
Hydrostatic transmission K62 for Rider Pro 15 and
ProFlex 18 with mounted cooling fan. Externally the
difference in relation to K66 can be seen in that K62
lacks the arm for the differential lock, and because
the oil drain and filter are located at the rear on
K66.
www.mymowerparts.com
Rider ProFlex 21 also has a differential lock which
enables the rear wheels to perform locked driving.
The differential lock is engaged and disengaged by
means of a pedal on the left-hand side of the
machine.
Hydrostatic transmission K66 for Rider ProFlex 21
seen from above. The diagram shows the transmis-
sion without cooling fan.
The arm for the differential lock is mounted on the
left side of the hydrostatic transmission. See the
picture under "Checking and adjusting of differential
lock".
Oil drain with filter on K66.
Design and function
19
Svenska –