For Husqvarna Parts Call 606-678-9623 or 606-561-4983
7
• Pull the handle (D) so that the hook guard locks.
• Check that the catch (A) is in its loaded position.
• Lift the unit off of the Rider.
D
www.mymowerparts.com
Removing the attachment frame
Starting point for removing attachment frame:
•
Cutting unit must be removed.
1
Release the catch so that the front mounting can be
lifted clear of the cutting unit.
2
Slide the attachment frame backwards so that the
tongue on the cutting unit is clear of the slot in the
attachment frame, then lift off the frame.
Refit in reverse order.
Reparation instructions
53
Svenska –