Refitting Hydrostatic Transmission Wire - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions
8
Lift out the transmission wire with the linkage
attached.
9
Unscrew both ball joints from the hydrostatic
transmission wire.
10
Remove the entire hydrostatic transmission wire.
40
– Svenska
www.mymowerparts.com

Refitting hydrostatic transmission wire

1
Screw the front ball joint onto the new transmission
wire and tighten the lock nut.
2
Run the wire through the mower so that it follows
the same route as the old wire.