Westerbeke 7.0 KW BGC -60Hz Technical Manual page 97

17. Replace the rotary throttle shaft valve and the throttle shaft valve spring.
18. Remove the fuel filter element plug and replace the fuel filter element.
19. Unscrew the fuel solenoid and replace the aluminum gasket. Screw in the solenoid.
Now the carburetor is rebuilt. Make sure all the screws on the carburetor are properly tightened and replace
the carburetor on the intake manifold using a new manifold gasket along with a gasket sealant. Resecure
the carburetor to the intake manifold.
Reconnect the fuel supply line, fuel solenoid wire, electric choke wire, and the throttle control linkage.
Reattach the flame arrester and tighten the flame arrester's clamp.
Fuel Filter 8ement
Fuel Filter
Fuel Solenoid Wire
93
Aluminum Gasket
8ectric
Choke
Wire
Westerbeke Generators