Westerbeke 7.0 KW BGC -60Hz Technical Manual page 116

6. Assemble the valve rocker shaft related parts.
a. Apply engine oil to the valve rocker arm inner
surface, pad surface and valve contact posi-
tion of the valve adjusting screw. Then as-
semble the plate washer, compression spring
and valve rocker arm to the valve rocker shaft.
b. Assemble the valve rocker shaft.
Rocker Shaft Installation (1)
.0
o o
NOTE: Care must be exercised to ensure that
the valve rocker arm or plate is assembled
properly.
Installation of Cylinder Head and Timing Belt
1. Install the cylinder head gasket.
2. I nstall the cylinder head assembly and tighten the
FRONT
cylinder head bolts, as indicated in the sequence ___
Rocker Shaft Installation (2)
evenly and progressively several times over.
-==::===============::::-
Tightening Torque: 36.2 - 33.4 ft-Ib
(5.0 - 6.0 kg-m)
Westerbeke Generators
112