Assembling The Oil Pump; Fresh Water Pump - Westerbeke 7.0 KW BGC -60Hz Technical Manual

7. Install the new oil seal using an appropriate service
tool.
a. Using the tool, install the new oil seal.
NOTE: Be careful not to install the new oil seal
slanted.
b. Coat the oil seal lightly with engine oil.
Assembling the Oil Pump
1. Install the relief valve.
a. Install the relief valve, spring and retainer to the
pump body.
b.lnstall the cotter pin.
2. Install the drive and driven gears.
a. Insert the drive and driven gear to the body.
b. Install the pump cover, tighten the 5 screws.
Tightening Torque: 5.8 - 9.4 ft-Ib (0.8 - 1.3 mm)
3. Install the a-ring.
Fresh Water Pump
No rebuilding kit is offered for the fresh water circulating
pumps on the 4.5 KW BCG, 7.0 KW BCG
&
BCGA.
RemOVal and replacement of the defective or worn pump
is, therefore, necessary.
Westerbeke Generators 84