Overview; Requirements - Compaq AIT 35 LVD Reference Manual

This chapter provides information on system and controller requirements, tape
specifications, and data compression for the Compaq Advanced Intelligent Tape
TM
(AIT) 35 LVD drive.

Requirements

Compaq recommends equipping the computer with a 32-bit Fast SCSI-2 Controller
or higher. Any of these controllers fully support the AIT 35 LVD tape drive. Install
the controller before beginning the drive installation, using the documentation
included with the controller.
IMPORTANT: All SCSI devices on the same bus must either be internal (within the
computer) or in an external storage device, but not both. The exception is a CD-ROM
drive, which may be internal when other devices are external or vice versa.
1
Chapter

Overview