2-8 Compaq AIT 35 LVD Tape Drive Reference Guide
Reassembling the Computer
Completing the Installation
To reassemble the computer:
1. Replace the access panel.
2. Reconnect the peripheral devices to the computer.
WARNING: To reduce the risk of electric shock or damage to your equipment,
do not disable the power cord grounding feature. This equipment is designed for
connection to a grounded (earthed) power outlet. The grounding plug is an
important safety feature.
3. Plug the AC main power cord into the computer, then plug the cord into a
grounded AC outlet.
4. Plug the AC main power cords from the peripheral devices into grounded
AC outlets.
5. Power ON all peripheral devices.
6. Power ON the computer.
Install the device drivers to complete the installation of the AIT 35 LVD tape drive.
See Chapter 4, "Installing the Software Drivers," for specific driver installation
information.