Windows Nt; Windows 2000 - Compaq AIT 35 LVD Reference Manual

4-2 Compaq AIT-MP Tape Drive Reference Guide

Windows NT

Windows 2000

Drivers for the SCSI controllers and tape drive hardware are located on Support
Software Diskettes, Compaq Tape Drive Supplemental Driver CD, and on the
Compaq SmartStart and Support Software CD. The Support Software ships with
each computer or can be downloaded from the Compaq website. The software tape
device driver is located either with your tape backup software, with the operating
system, or on the supplemental driver CD. Refer to your backup application
installation guide for more information regarding additional software that might be
needed .
Controller
32-Bit Fast SCSI-2 Controllers
or 32-Bit Fast-Wide SCSI-2 Controllers
or Wide-Ultra SCSI Controllers
IMPORTANT: If the SCSI controller to which your drive is attached was not present during
your initial Windows NT installation, install the SCSI device driver for the controller before
installing the tape class driver.
Refer to "Compaq Tape Support" in the NTREADME.HLP file on the Compaq
Support Software for Microsoft Windows NT diskette.
Drivers for the SCSI controllers and tape drive hardware are located on Support
Software Diskettes, Compaq Tape Drive Supplemental Driver CD, and on the
Compaq SmartStart and Support Software CD. The Support Software ships with
each computer or can be downloaded from the Compaq website. The software tape
device driver is located either with your tape backup software, with the operating
system, or on the supplemental driver CD. Refer to your backup application
installation guide for more information regarding additional software that might be
needed.
To install the controller drivers:
1. Log on as Administrator.
2. Insert Compaq SmartStart and Support Software CD, version 4.9 or greater
into the CD-ROM drive.
Table 4-1
Windows NT
Software Driver Information
Refer to "Compaq SCSI Controller Support" in
the NTREADME.HLP file on the Compaq
Support Software for Microsoft Windows NT
diskette, Version 1.21 or later.