Novell Netware; Aspi Support - Compaq AIT 35 LVD Reference Manual

3. When the license agreement screen appears, click I Agree, and then OK to
continue. The System Utility Screen appears.
4. Click the Compaq Support Paq icon once to highlight, then click OK. The
Compaq Remote Deployment Utility appears.
5. Click on the checkboxes to select or deselect the desired items, then click
Install on the tool bar.
6. All selected items are installed and the Installation Results screen displays,
showing which drivers were loaded successfully.

Novell NetWare

Drivers for the SCSI controller and tape drive hardware are located on Support
Software Diskettes and on the Compaq SmartStart and Support Software CD. The
Support Software ships with each computer or can be downloaded from the
Compaq website. The software tape device driver is located either with your tape
backup software or with the operating system. Refer to your backup software
application installation guide for more information regarding additional software
that might be needed
32-Bit Fast SCSI-2 Controllers
or 32-Bit Fast-Wide SCSI-2 Controllers
or Wide-Ultra SCSI Controllers
Be sure to load the drivers in accordance with the Compaq controller being used.
There are additional driver issues if you wish to use applications requiring the
Advanced SCSI Programming Interface (ASPI) support. For more information see
the following section.

ASPI Support

The README.COM on the Novell Software Support Diskette (NSSD) outlines the
specific drivers you need to support ASPI tape backup applications.
If you are using a tape backup application that uses the ASPI, such as ARCserve
from Compaq or Seagate BackupExec, refer to the information provided with your
application NLM to determine whether it uses ASPI.
.
Table 4-2
Novell NetWare
Controller
Installing the Software Drivers 4-3
Software Driver Information
Run the README.COM file on any of the
Novell Software Support Diskettes (NSSD) for
driver installation instructions.