Overview - Compaq ProLiant Storage System User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3
Installation
This section describes the initial installation of a ProLiant Storage System in a
network controlled by any of several Compaq servers. Please review
Chapter 2, "Configuration Planning," in this guide before you begin installation
of a ProLiant Storage System.

Overview

Installation of the ProLiant Storage System involves the following steps:
Each of these steps is covered in more detail in the following sections.
Locate the appropriate equipment needed for the installation.
Install a SCSI controller in the server if one is not already installed or
integrated in the server. Follow the instructions included with the
controller for installation of this option.
Install the Fast-Wide Duplexing Option in the ProLiant Storage System
if this option is to be used. Follow the instructions included with the
option kit or those in Chapter 6 of this guide for installing this option.
Connect the server to the storage system.
Install the hard drives in the storage system.
Power up the system.
Configure the system.
Compaq ProLiant Storage System User Guide
3-1