Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1027R-N3RF
Installation and maintainance should be performed by experienced technicians only.
The SuperServer 1027R-N3RF is a high-end server based on the SC116TS-R700WBP
1U rackmount chassis and the X9DRW-3F dual processor serverboard.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRW-3F serverboard and
the SC116TS-R700WBP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1027R-N3RF
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 1027R-N3RF.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9DRW-3F serverboard, including
the locations and functions of connections, headers and jumpers. Refer to
this chapter when adding or removing processors or main memory and when
reconfi guring the serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
