Ipmi - Supero SUPERSERVER 1027R-N3RF User Manual

SUPERSERVER 1027R-N3RF USER'S MANUAL
View System Event Log
This item allows the user to view the event in the system event log. Select this
item and press <Enter> to view the status of an event in the log as shown below:
Date/Time/Sensor/Type
7-4

IPMI

Use this feature to confi gure Intelligent Platform Management Interface (IPMI)
settings.
IPMI Firmware Revision
This item indicates the IPMI fi rmware revision used in your system.
IPMI Status
This item indicates the status of the IPMI fi rmware installed in your system.

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Enabled
and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No, Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are Do Nothing and Erase Immediately.
Customize EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Enabled and Disabled.
7-24