Table of Contents
Advertisement
2-5
Installing the System into a Rack
This section provides information on installing the SC116 chassis into a rack unit with
the rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE: This rail will fi t a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two quick release rack rail assemblies in the rack
mounting kit. Each assembly consists of two sections: an inner fi xed chassis rail
that secures directly to the server chassis and an outer fi xed rack rail that secures
directly to the rack itself.
Figure 2-1. Identifying the Sections of the Rack Rails
Inner Rails
Chapter 2: Server Installation
2-5
Inner Rail
Extensions
Advertisement
Table of Contents
