Table of Contents
Advertisement
5-8
Installing the Air Shroud (Optional)
Air shrouds concentrate airflow to maximize fan efficiency. The SC119 chassis air
shroud does not require screws to set up.
Air Shroud Installation
1. Power down the system and disconnect the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 5-2.
2. Align the notch on the air shroud with the screw on the side of the fan tray.
3. Lower the air shroud into position, sliding the notch over the screw on the
side of the fan tray.
Chapter 5 Chassis Setup and Maintenance
Figure 5-13: Air Shroud Installation
5-13
Notch
Screw
Advertisement
Table of Contents
