Supero SC119TQ-R700UB User Manual page 49

WIO
Riser
Card
Installing Expansion and Riser Cards
1. Confirm that you have the correct riser card for your chassis model and the
expansion card includes a standard bracket.
2. Power down the system and disconnect the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 5-2.
3. Install the riser card onto the riser card bracket. Insert the card and bracket
into the appropriate slot on the motherboard. Secure the riser bracket to the
chassis using screws as illustrated.
4. Choose the PCI slot in which to place the expansion card.
5. In that slot, open the PCI slot lever and slide the PCI slot cover sideways.
Chapter 5 Chassis Setup and Maintenance
Figure 5-10: Installing a Riser Card
5-11
UIO
Riser
Card