Control Panel Leds - Supero SC119TQ-R700UB User Manual

4-3

Control Panel LEDs

The control panel located on the front of the SC119 chassis has five LEDs. These
LEDs provide critical information related to different parts of the system. This sec-
tion explains what each LED indicates when illuminated and any action that may
be required.
Status
Solid red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
NIC2: Indicates network activity on GLAN2 when flashing.
NIC1: Indicates network activity on GLAN1 when flashing.
HDD: Indicates IDE channel activity, SAS/SATA drive, and/or DVD-ROM drive
activity when flashing.
Power: Indicates power is being supplied to the system's power supply units. This
LED should normally be illuminated when the system is operating.
Informational LED
An overheat condition has occured.
(This may be caused by cable congestion).
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational
power supply.
Local UID has been activated. Use this
function to locate the server in a rack
mount environment.
Remote UID is on. Use this function to
identify the server from a remote location.
4-3
Chapter 4 System Interface
Description